FAQ

Sea&Sea TTL Converter

TTL Converter II for Nikon

 Pris: ? kr ***. Beställ genom att mejla eller besöka en av våra återförsäljare.

#50108

This converter is equipped with a built-in TTL PCB that connects a Nikon digital SLR with SEA&SEA YS-Series strobes and uses the camera’s TTL flash adjustment to control the amount of light put out by the strobe. The converter allows quick switching underwater between TTL mode and manual mode from outside the camera. You can use the TTL correction dial after checking the results of a shot in the LCD monitor to adjust the amount of strobe light for the next shot. Because the converter comes with two separate strobe connectors, you can use advanced automatic TTL flash adjustment with two strobes.

Specifications:

  • Construction: Main body: Polycarbonate, Mounting plate: Corrosion-resistant aluminum alloy.
  • Controls: TTL mode / manual switch / TTL light adjustment dial (from +1 to -1 in 1/3 increments)
  • Battery: CR2 lithium battery (included)
  • Strobe-side connector: 5-pin Sync Cord/N, Camera-side connector: Type-N sync cord (5-pin connector)
  • Depth rating: 60m / 200ft
  • Dimensions (WxHxD): 95x85x75mm / 3.8x3.4x3inch
  • Weight: Approx. 420g / 14.7oz (including CR2 battery)
  • Compatible housings: DX-D200, DX-D80, DX-D70/70s (with customized connector), DX-D50 (with customized connector)
  • Light adjustment recognition: Nikon method (TTL flash adjustment)
  • Compatible strobe: Please refer to the compatibility list.

*Switching to manual on the converter means activating the manual function on the connected YS strobe (depending on the strobe model).
*To use TTL flash adjustment with two strobes, both strobes must be the same model.
*If the TTL converter battery runs out of power, the connected YS strobes do not fire.
*Requires the 5-pin Sync Cord/N to connect a strobe.

TTL Converter for Canon

 Pris: ? kr ***. Beställ genom att mejla eller besöka en av våra återförsäljare.

#50106

This converter is equipped with a built-in TTL PCB that connects a Canon digital SLR with SEA&SEA YS-Series strobes and uses the camera's TTL flash adjustment to control the amount of light put out by the strobe. The converter allows quick switching underwater between TTL mode and manual mode from outside the camera. You can use the TTL correction dial after checking the results of a shot in the LCD monitor to adjust the amount of strobe light for the next shot. Because the converter comes with two separate strobe connectors, you can use advanced automatic TTL flash adjustment with two strobes.

Specifications:

  • Construction: Main body: Polycarbonate, Mounting plate: Corrosion-resistant aluminum alloy
  • Controls: TTL mode / manual switch / TTL light adjustment dial (from +1 to -1 in 1/3 increments)
  • Battery: CR2 lithium battery (included)
  • Strobe-side connector: 5-pin Sync Cord/N
  • Camera-side connector: Type-N sync cord (6-pin connector)
  • Depth rating: 60m / 200ft
  • Dimensions (WxHxD): 95x85x75mm / 3.8x3.4x3inch
  • Weight: Approx. 420g / 14.7oz (including CR2 battery)
  • Compatible housings: DX-5D, DX-350D (with customized connector)
  • Light adjustment recognition: Canon method (TTL flash adjustment)
  • Compatible strobes: Please refer to the compatibility list.

*Switching to manual on the converter means activating the manual function on the connected YS strobe (depending on the strobe model).
*To use TTL flash adjustment with two strobes, both strobes must be the same model.
*If the TTL converter battery runs out of power, the connected YS strobes do not fire.
*Requires the 5-pin Sync Cord/N to connect a strobe.

Detaljer

An important notice to customers using TTL converters:

Thank you for using SEA&SEA products.

We’d like to inform you about possible power source compatibility problems between our TTL converters and housings made by other companies for SLR cameras. Our converters are designed for use with SEA&SEA housings and may not work with other housings. We advise customers who use or are thinking of using our products with other housings to first contact the housings’ manufacturers and inform them of the power source specifications for our converters.

Our TTL converters are designed with a positive ground. Please be aware that this may cause problems when using the converters with housings that are designed with a negative ground.

We appreciate that our TTL converters have enjoyed wide acceptance, but we’d like to caution users that we can’t ensure the converters’ compatibility with other manufacturers’ housings.

Applicable products:

  • TTL Converter (For Nikon) Product No. 50104
  • TTL Converter (For Canon) Product No. 50106
  • TTL Converter II (For Nikon) Product No. 50108

Patima hus hus fungerar bra tillsamammns med Sea&Sea TTL-converter.

Undrar du något?

Vi anstränger oss för att svaren på alla dina frågor ska finnas på sajten. Faktum är att svaren på 90% av frågorna vi får står på en av följande sidor:

Börja med att titta där!

Hittar du inte svaren där, eller om något inte verkar stämma, är du naturligtvis välkommen att kontakta oss med dina frågor.

Go To Wet Accessories Home
 
 

Informationen på denna sida är korrekt så vitt vi vet. Mått och specifikationer är tillverkarens uppgifter.

Om något är oklart eller felaktigt ber vi dig kontakta oss.

  
 
Copyright © 2004 - 2006 Wet Accessories
"no" design by Optimatika